Weight | 0.010 kg |
---|---|
Size | 200mm, 300mm, 500mm |
Related products
Raspberry Pi Zero v1.3 Development Board
The Raspberry Pi Zero v1.3 is super low cost and smaller than it’s bigger brother, the Raspberry Pi 3. The Raspberry Pi Zero v1.3 now comes complete with a camera port. Using the new Raspberry Pi Zero Camera Adapter, you can now connect a Raspberry Pi camera to your Zero.
HAT Compatibility:
The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Raspberry Pi 3 Model B 1GB RAM Single Board Computer
SKU:- RPi3B
The next generation Quad Core Broadcom BCM2837 64-bit ARMv8 processor.
The processor speed increase from 900 MHz on the Pi 2 to up to 1.2GHz on the Pi 3.
The addition of a BCM43438 WiFi chip BUILT-IN to your Raspberry Pi – this Pi is WiFi ready.
There is also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution.
There is an upgraded switched power source that goes up to 2.5 Amps.
Raspberry Pi 5 4GB RAM Single Board Computer
SKU :- RPi54GB
MPN :- SC1111
Raspberry Pi 5 Model 4GB with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz.
Impressive 2–3× increase in CPU performance compared to its predecessor, the Raspberry Pi 4B. It will perform best with active cooling.
Delivers a substantial boost in graphics with its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI.
You will need the latest version of Raspberry Pi OS, Bookworm, for your Raspberry Pi 5.
Note:-Recommended a high-quality 5V 5A USB-C power supply, such as the new Raspberry Pi 27W USB-C Power Supply.
Raspberry Pi 3 Model B Kit with Adapter Case LAN-HDMI Cable HeatSink SD Card – The Complete Kit
SKU :- RPi3BKIT
MPN :- RPi3B1GKIT
Includes Raspberry Pi 3 Model B 64-bit Quad-Core 1.2 GHz 1 GB RAM Board.
16GB (Class 10) Micro SD Card Preloaded with NOOB latest Version.
5V 2A Micro USB Power Supply with Micro USB Cable and Noise Filter – designed for the Raspberry Pi 3 Model B/B+.
1m HDMI Cable and 1m LAN Cable.
Applications: Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things).
Raspberry PI Pico with Headers and Micro USB Cable
- RP2040 microcontroller chip designed by Raspberry Pi
- Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz
- 264KB of SRAM, and 2MB of onboard Flash memory
- 26 Ă— multi-function GPIO pins
- 2 Ă— SPI, 2 Ă— I2C, 2 Ă— UART, 3 Ă— 12-bit ADC, 16 Ă— controllable PWM channels
- Onboard temperature sensor
Raspberry Pi Sense HAT for the Pi 3/2/B+/A+ Model
Raspberry Pi Sense HAT is a sensor-packed add-on to your Raspberry Pi 3, 2, B+ and A+ boards. It mounts right on top of your Raspberry Pi and all you need to do is run your code.
Raspberry Pi 5 8GB RAM Single Board Computer
SKU :- RPi58GB
MPN :- SC1112
Raspberry Pi 5 Model 8GB with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz.
Impressive 2–3× increase in CPU performance compared to its predecessor, the Raspberry Pi 4B. It will perform best with active cooling.
Delivers a substantial boost in graphics with its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI.
You will need the latest version of Raspberry Pi OS, Bookworm, for your Raspberry Pi 5.
Note:-Recommended a high-quality 5V 5A USB-C power supply, such as the new Raspberry Pi 27W USB-C Power Supply.
Raspberry Pi Compute Module 4 Antenna Kit
SKU :- RPiCM4AntKit
Mfr Part No :- SC0480/COMPUTE MODULE CM4 ANTENNA KIT
Compatible with the all models of Raspberry Pi compute module.
This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4.
Start planning your next Raspberry Pi wireless project with the new CM4 Antenna Kit.
The antenna kit comprises an antenna, which has been pre-certified for use with CM4, a bulkhead fixture, and a cable.
UFL to SMA female connector antenna kit has undergone extensive testing and is fully certified for use with the RPiCM4.
Raspberry Pi 4 Model B 8GB RAM Single Board Computer
SKU :- RPi4B8GB
Mfr Part No :- SC0195(9)
Raspberry Pi 4 Model B (RPi 4B) has high-performance 64-bit Quad-Core 1.5 GHz Processor which provides desktop performance comparable to entry-level x86 PC systems.
On-board dual-band 2.4/5.0 GHz Wi-Fi and 5.0 Bluetooth Connectivity supports dual 4K output, video decode at upto 4Kp60, USB 3.0, and PoE capability.
Operating Power 5V 3A 15W via USB Type-C port. OpenGL ES, 3.0 graphics. Micro SD card slot for loading operating system and data storage.
Applications- Embedded Design & Development, Hobby & Education, IoT (Internet of Things), Communications & Networking.
Raspberry Pi Build HAT
- Input Voltage:7.2-8.5 V
- GPIO pins:40
- Interface Connector Type: LPF2
- Easy-to-use Python library to control your LEGO Technic devices
- Onboard Raspberry Pi RP2040 microcontroller manages low-level control of LEGO Technic devices
Raspberry Pi Compute Module 4 I/O Board
SKU:- RPiCM4IOB
Manufacturer Part Number :- SC0326
- External power connector (+12V, +5V)
- 2 x full-size HDMI 2.0 connectors
- Gigabit Ethernet RJ45 with PoE support
- Micro USB socket for updating Compute Module 4
- PCIe Gen 2 x1 socket
- Standard Raspberry Pi HAT connectors.
Raspberry Pi 3 Model B+ Kit with Adapter, Case, LAN & HDMI Cable, HeatSink, SD Card – The Complete Kit
SKU :- RPi3B+KIT
MPN :- RPi3B+1GKIT
Includes Raspberry Pi 3 Model B+ 64-bit Quad-Core 1.4 GHz 1 GB RAM Board.
16GB (Class 10) Micro SD Card Preloaded with NOOB latest Version. 1m HDMI Cable and 1m LAN Cable.
5V 2A Micro USB Power Supply with Micro USB Cable and Noise Filter – designed for the Raspberry Pi 3 Model B/B+.
Applications: Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things).
Reviews
There are no reviews yet.