Weight | 0.010 kg |
---|---|
Size | 200mm, 300mm, 500mm |
Related products
Raspberry Pi Sense HAT for the Pi 3/2/B+/A+ Model
Raspberry Pi Sense HAT is a sensor-packed add-on to your Raspberry Pi 3, 2, B+ and A+ boards. It mounts right on top of your Raspberry Pi and all you need to do is run your code.
Raspberry Pi Zero v1.3 Development Board
The Raspberry Pi Zero v1.3 is super low cost and smaller than it’s bigger brother, the Raspberry Pi 3. The Raspberry Pi Zero v1.3 now comes complete with a camera port. Using the new Raspberry Pi Zero Camera Adapter, you can now connect a Raspberry Pi camera to your Zero.
HAT Compatibility:
The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Official Raspberry Pi 5 Case Red/White
SKU :- RPi5CRW
MPN :- SC1159
Integrated, temperature-controlled cooling fan.
2mm×17mm×4mm heatsink with self-adhesive pad.
Easily removable lid exposes fan and breakout slot for cables and GPIO.
Integrated mounting features allow for case stacking.
Four silicone feet for the case are included.
Raspberry Pi Zero Wireless WH (Pre-Soldered Header)
- Fully HAT compatible
- 40pin GPIO (Unpopulated)
- Stream and watch Hi-definition video output at 1080P
- 512MB RAM and Micro SD Slot for OS
- Tiny Current Draw ~ 140mA at 5V!
- Mini-HDMI for Video
- Micro-USB OTG Host for Data and Power
- Micro-CSI Camera Port
- On-Board Bluetooth and WiFi.
Official Raspberry Pi 400 Personal Computer
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port.
- Keyboard Layout: US
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
- Built-in Raspberry Pi Official Keyboard
Raspberry Pi 5 8GB RAM Single Board Computer
SKU :- RPi58GB
MPN :- SC1112
Raspberry Pi 5 Model 8GB with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz.
Impressive 2–3× increase in CPU performance compared to its predecessor, the Raspberry Pi 4B. It will perform best with active cooling.
Delivers a substantial boost in graphics with its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI.
You will need the latest version of Raspberry Pi OS, Bookworm, for your Raspberry Pi 5.
Note:-Recommended a high-quality 5V 5A USB-C power supply, such as the new Raspberry Pi 27W USB-C Power Supply.
Raspberry Pi 3 Model B+ 1GB RAM Single Board Computer
SKU :- RPi3B+
Mfr Part No :- SC0073
The next generation Quad Core Broadcom BCM2837B0 64-bit ARMv8 processor.
The processor speed increase from 1.2GHz on the Pi 3B to up to 1.4GHz on the Pi 3B+.
The addition of a BCM43438 WiFi chip BUILT-IN to your Raspberry Pi – this Pi is WiFi ready.
There is also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution.
There is an upgraded switched power source that goes up to 2.5 Amps.
Raspberry Pi 3 Model B+ Kit with Adapter, Case, LAN & HDMI Cable, HeatSink, SD Card – The Complete Kit
SKU :- RPi3B+KIT
MPN :- RPi3B+1GKIT
Includes Raspberry Pi 3 Model B+ 64-bit Quad-Core 1.4 GHz 1 GB RAM Board.
16GB (Class 10) Micro SD Card Preloaded with NOOB latest Version. 1m HDMI Cable and 1m LAN Cable.
5V 2A Micro USB Power Supply with Micro USB Cable and Noise Filter – designed for the Raspberry Pi 3 Model B/B+.
Applications: Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things).
Raspberry Pi Compute Module 4
Raspberry Pi Compute Module 4 Antenna Kit
SKU :- RPiCM4AntKit
Mfr Part No :- SC0480/COMPUTE MODULE CM4 ANTENNA KIT
Compatible with the all models of Raspberry Pi compute module.
This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4.
Start planning your next Raspberry Pi wireless project with the new CM4 Antenna Kit.
The antenna kit comprises an antenna, which has been pre-certified for use with CM4, a bulkhead fixture, and a cable.
UFL to SMA female connector antenna kit has undergone extensive testing and is fully certified for use with the RPiCM4.
Raspberry Pi 3 Model B Kit with Adapter Case LAN-HDMI Cable HeatSink SD Card – The Complete Kit
SKU :- RPi3BKIT
MPN :- RPi3B1GKIT
Includes Raspberry Pi 3 Model B 64-bit Quad-Core 1.2 GHz 1 GB RAM Board.
16GB (Class 10) Micro SD Card Preloaded with NOOB latest Version.
5V 2A Micro USB Power Supply with Micro USB Cable and Noise Filter – designed for the Raspberry Pi 3 Model B/B+.
1m HDMI Cable and 1m LAN Cable.
Applications: Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things).
Official Raspberry Pi 400 Personal Computer -German Layout (Unit Only)
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port.
- Keyboard Layout: German
- Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
- Built-in Raspberry Pi Official Keyboard
Reviews
There are no reviews yet.