Weight | 0.010 kg |
---|---|
Size | 200mm, 300mm, 500mm |
Related products
Raspberry Pi 3 Model B+ Kit with Adapter, Case, LAN & HDMI Cable, HeatSink, SD Card – The Complete Kit
SKU :- RPi3B+KIT
MPN :- RPi3B+1GKIT
Includes Raspberry Pi 3 Model B+ 64-bit Quad-Core 1.4 GHz 1 GB RAM Board.
16GB (Class 10) Micro SD Card Preloaded with NOOB latest Version. 1m HDMI Cable and 1m LAN Cable.
5V 2A Micro USB Power Supply with Micro USB Cable and Noise Filter – designed for the Raspberry Pi 3 Model B/B+.
Applications: Embedded Design & Development, Electronics Design, Hobby & Education, Communications & Networking, Consumer Electronics, IoT (Internet of Things).
Raspberry Pi 3 Model A+ Single Board Computer
SKU:- RPi3A+
Broadcom BCM2837B0, Cortex-A53 64-bit SoC @ 1.4 GHz.
512MB LPDDR2 SDRAM with 2.4GHz/5GHz 802.11 b/g/n Wireless LAN. Bluetooth Low Energy 4.2 (BLE).
Full Size HDMI, MIPI DSI Display Port, MIPI CSI Camera Port.
4-Pole stereo audio/composite video jack. MicroSD Card for OS and data storage.
5V, 2.5A DC power supply via micro USB or GPIO.
Official Raspberry Pi 400 Personal Computer -German Layout (Unit Only)
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port.
- Keyboard Layout: German
- Dual-Display Micro HDMI Ports which supports H 265 Decode for 4K Video @60p
- Built-in Raspberry Pi Official Keyboard
Raspberry Pi Sense HAT for the Pi 3/2/B+/A+ Model
Raspberry Pi Sense HAT is a sensor-packed add-on to your Raspberry Pi 3, 2, B+ and A+ boards. It mounts right on top of your Raspberry Pi and all you need to do is run your code.
Raspberry Pi Build HAT
- Input Voltage:7.2-8.5 V
- GPIO pins:40
- Interface Connector Type: LPF2
- Easy-to-use Python library to control your LEGO Technic devices
- Onboard Raspberry Pi RP2040 microcontroller manages low-level control of LEGO Technic devices
Raspberry Pi Compute Module 4 Antenna Kit
SKU :- RPiCM4AntKit
Mfr Part No :- SC0480/COMPUTE MODULE CM4 ANTENNA KIT
Compatible with the all models of Raspberry Pi compute module.
This Antenna Kit is certified for use with the Raspberry Pi Compute Module 4.
Start planning your next Raspberry Pi wireless project with the new CM4 Antenna Kit.
The antenna kit comprises an antenna, which has been pre-certified for use with CM4, a bulkhead fixture, and a cable.
UFL to SMA female connector antenna kit has undergone extensive testing and is fully certified for use with the RPiCM4.
Raspberry Pi 5 8GB RAM Single Board Computer
SKU :- RPi58GB
MPN :- SC1112
Raspberry Pi 5 Model 8GB with a 64-bit quad-core Arm Cortex-A76 processor clocked at 2.4GHz.
Impressive 2–3× increase in CPU performance compared to its predecessor, the Raspberry Pi 4B. It will perform best with active cooling.
Delivers a substantial boost in graphics with its 800MHz VideoCore VII GPU, supports dual 4Kp60 display output via HDMI.
You will need the latest version of Raspberry Pi OS, Bookworm, for your Raspberry Pi 5.
Note:-Recommended a high-quality 5V 5A USB-C power supply, such as the new Raspberry Pi 27W USB-C Power Supply.
Official Raspberry Pi 5 27W USB-C Power Supply
Raspberry Pi Zero v1.3 Development Board
The Raspberry Pi Zero v1.3 is super low cost and smaller than it’s bigger brother, the Raspberry Pi 3. The Raspberry Pi Zero v1.3 now comes complete with a camera port. Using the new Raspberry Pi Zero Camera Adapter, you can now connect a Raspberry Pi camera to your Zero.
HAT Compatibility:
The Pi Zero is fully compatible with all HAT breakout boards, as it features the same 40 Pin GPIO as the Raspberry Pi 2/B+/A+
Raspberry Pi 3 Model B+ 1GB RAM Single Board Computer
SKU :- RPi3B+
Mfr Part No :- SC0073
The next generation Quad Core Broadcom BCM2837B0 64-bit ARMv8 processor.
The processor speed increase from 1.2GHz on the Pi 3B to up to 1.4GHz on the Pi 3B+.
The addition of a BCM43438 WiFi chip BUILT-IN to your Raspberry Pi – this Pi is WiFi ready.
There is also Bluetooth Low Energy (BLE) on board making the Pi an excellent IoT solution.
There is an upgraded switched power source that goes up to 2.5 Amps.
Official Raspberry Pi 400 Personal Computer
- Quad-Core 64-bit Broadcom 2711, Cortex A72 Processor
- WLAN 802.11 b/g/n/ac (2,4 + 5,0 GHz)
- LAN RJ45 10/100/1000 Mbit (Gigabit LAN over USB 3.0)
- Operating Power 5V@3A via USB Type-C port.
- Keyboard Layout: US
- Dual-Display Micro HDMI Ports which support H 265 Decode for 4K Video @60p
- Built-in Raspberry Pi Official Keyboard
Raspberry Pi TV HAT
The Raspberry Pi TV HAT allows you to receive digital terrestrial TV broadcast systems which include DVB-T and DVB-T2 on a Raspberry Pi.
Reviews
There are no reviews yet.